The use of wire-to-board terminals is convenient and fast, and it is suitable for interconnecting a large number of wires. In the power industry, there are special terminal blocks and terminal boxes, all of which are terminal blocks, single-layer, double-layer, current, voltage, etc. Ordinary, breakable, etc. A certain crimping area is to ensure reliable contact and to ensure that enough current can pass.

A wire-to-board terminal is actually a piece of metal enclosed in insulating plastic. There are holes at both ends to insert wires. There are screws for fastening or loosening. For example, two wires need to be connected sometimes and sometimes need to be disconnected. The terminals can then be used to connect them, and can be disconnected at any time without soldering or twisting them together.

Assembly ears can be added to both ends of the wire-to-board terminal socket. The assembly ears can protect the tabs to a large extent and prevent the tabs from being poorly arranged. At the same time, this socket design can ensure that the socket can be correctly inserted into the mother body. The socket also There can be assembly buckles and locking buckles. The assembly buckles can be fixed to the PCB board more firmly, and the locking buckles can lock the mother body and the socket after the installation is completed. A variety of socket designs can be matched with different parent insertion methods, such as: horizontal, vertical or inclined to the printed circuit board, etc., and different methods can be selected according to customer requirements. Either metric or standard wire gauges can be selected.