News
The company integrates product design, mold development, precision stamping, precision injection molding, precision processing and automatic assembly in one
/
/
/
A brief introduction to the precautions for wire-to-board terminal connection

A brief introduction to the precautions for wire-to-board terminal connection

  • Time of issue:2022-04-22 10:59
  • Views:

A brief introduction to the precautions for wire-to-board terminal connection

(Summary description)Under normal circumstances, the wires below 6 m2 are used for external wiring without terminals and external wiring with terminals, respectively, according to whether there are actual terminals.

  • Time of issue:2022-04-22 10:59
  • Views:
Information

Under normal circumstances, the wires below 6 m2 are used for external wiring without terminals and external wiring with terminals, respectively, according to whether there are actual terminals.

Wire to board terminal manufacturers

How are the terminals connected?

All kinds of electrical equipment used in the home must be connected to the power supply, so indoor wiring must be done when installing the house.

First peel off the insulation layer of the wire by 6~8mm, insert the exposed copper wire into the terminal, fasten the upper end with a screwdriver, and pull it several times by hand to check whether there is any falling off wire on the wire and the terminal is firmly connected, and then press the switch , the connection is successful when the light is on.

Wire-to-Board Terminal Considerations.

1. When wiring, the power must be cut off to work, and it is not allowed to run with electricity. If you do not know whether the power supply is cut off, you can use a pen and a multimeter to check. When connecting, if there is a sliding key at the connection end or switch end of the connector, it should be replaced immediately. Otherwise, there is a risk of electric shock.

2. When turning on the power, remember to install pvc. If there is a wire on the ceiling, please do not pull it up at will. In addition, when installing, place brackets on the pipe corners and fix the wire pipes. Do not place wires on the stand or keel without any securing measures.

3. When installing the wires, please note that the length of the wires in the switch box should not be too long. After the line is connected, please send the wire into the pipeline, do not insert it into the switch to fix it. In addition, the host cannot be installed under a fixed socket, otherwise it will affect the safety of home appliances.

Related news

There is currently no information to display
Please add data record on website background.
  

Service hotline

Mon To Fri 09:00-18:00

Copyright@2020 Guangdong Jingchang Electronic Co. , Ltd. 粤ICP备2021014398号
Technical Support: 300.cn, Dongguan